VW Polo 6C door lighting retrofit unlock
OBDAPP Sequence
VW Polo 6C doorlighting retrofit unlock
your benefits
Facilitates boarding in the dark
A real eye catcher
Real-time vehicle functions from the cloud
No subscription, no hidden additional costs
Unlimited, can be used for an unlimited period of time
Resetting to factory settings
- After activation, the retrofitted door lighting (select whether the variant is to be retrofitted only at the front and activated accordingly, or at the front and rear) is enabled.
- This is then automatically activated in accordance with the manufacturer's specifications when entering and exiting the vehicle.
- VW Polo 6C
- all years of manufacture
- SERVICE Electric parking brake for maintenance work open / close
- SERVICE Transport mode adjust (disable / enable transport mode)
- SERVICE Haldex coupling open / close
- SERVICE Interval manager (simple service reset for all supported VAG vehicle models)
- perform flexible oil service reset
- execute a reset of the scheduled inspection
- carry out a reset of the mileage-based inspection
- SERVICE Battery manager
- set nominal battery capacity
- specify battery technology
- specify battery manufacture
- SERVICE battery data
- reads current voltage from 12V battery
- reads current state of charge from 12V battery
- reads current battery temperature from 12V battery
- SERVICE High-voltage battery data
- reads current high-voltage battery voltage
- reads current high-voltage battery state of charge
- reads current high-voltage battery temperature
- OBDAPP VW Polo 6C door lighting retrofit unlock
- Technology made in Germany
- download free on Apple AppStore / Android PlayStore - OBDAPP Interface
- Hardware made in EU
- 5 years full manufacturer warranty - OBDAPP Interface storage case
- Made in Germany
- Hard shell case with digital print and custom-fit foam insert - OBDAPP quick start guide
- :
-
OBDAPP
only works with an
OBDAPP Interface!
OBDAPP Interface
The interface serves between the OBD system (on-board diagnostics) of the vehicle and our OBDAPP.
The connection between the smartphone / tablet and the OBDAPP interface is made via Bluetooth LE.
Any number of smart devices (smartphone or tablet) can be connected to one interface.
pimp your car in only 6 steps:
1. download OBDAPP from
Apple AppStore or Android Playstore
2. plug the OBDAPP Interface into
the OBD-Port of your car
3. activate ignition and
connect to the OBDAPP interface in OBDAPP
4. execute the full automated functions
or run dtc section and live data
5. check the function after activation
and enjoy your new features!
6. DONE!
You can unplug the OBDAPP interface from OBD-Port
(or let it plugged in)
