VW Golf 8 rear view camera (rvc) retrofit activation
OBDAPP sequence
VW Golf 8 rear view camera (rvc) retrofit activation
Your benefits
Safety upgrade
Comfortable unlocking after retrofitting
Upgrading of the vehicle
Reverse parking process significantly facilitated
Unlimited, can be used for an unlimited period of time
Resetting to factory settings
- Activation of a retrofitted rear view camera (RFK). After activation, the status is the same as ordered from the factory. All dependent control units such as the parking aid, the navigation system or MMI as well as the gateway control unit are correctly defined to the retrofitted rear view camera.
- Thus, you will automatically receive the corresponding image when you engage reverse gear or manual operation of the parking aid / rear view camera.
- If the rear view camera does not yet contain any parameters, this will also be done automatically.
- VW Golf 8
- all years of manufacture
- SERVICE Electric Parking Brake for maintenance work open / close
- SERVICE Transport Mode adjust (disable / enable transport mode)
- SERVICE Haldex coupling open / close
- SERVICE Interval Manager (simple service reset for all supported VAG vehicle models)
- perform flexible oil service reset
- execute a reset of the scheduled inspection
- carry out a reset of the mileage-based inspection
- SERVICE Battery Manager
- set nominal battery capacity
- specify battery technology
- specify battery manufacture
- SERVICE Batterie data
- reads current voltage from 12V Batterie
- reads current state of charge from 12V Batterie
- reads current battery temperature from 12V Batterie
- SERVICE High-voltage Battery data
- reads current high-voltage battery voltage
- reads current high-voltage battery state of charge
- reads current high-voltage battery temperature
- OBDAPP VW Golf 8 rear view camera (RFK) retrofit activation
- Technologie Made in Germany
- download free on Apple AppStore / Android PlayStore - OBDAPP Interface
- Hardware Made in EU
- 5 Jahre full manufacturer warranty - OBDAPP Interface storage case
- Made in Germany
- Hard shell case with digital print and custom-fit foam insert - OBDAPP quick start guide
- :
-
OBDAPP
only works with an
OBDAPP Interface!
OBDAPP Interface
The interface serves between the OBD system (on-board diagnostics) of the vehicle and our OBDAPP.
The connection between the smartphone / tablet and the OBDAPP interface is made via Bluetooth LE.
Any number of smart devices (smartphone or tablet) can be connected to one interface.
pimp your car in only 6 steps:
1. download OBDAPP from
Apple AppStore or Android Playstore
2. plug the OBDAPP Interface into
the OBD-Port of your car
3. activate ignition and
connect to the OBDAPP interface in OBDAPP
4. execute the full automated functions
or run dtc section and live data
5. check the function after activation
and enjoy your new features!
6. DONE!
You can unplug the OBDAPP interface from OBD-Port
(or let it plugged in)
