OBDAPP Sequenz
Audi Q5 FY traffic jam assist (TJA) activation
Your benefits
Upgrading of the vehicle
Additional assistant / reaction support
Significant plus when the driver is tired
Greater comfort by relieving the driver of routine tasks
Unlimited, can be used for an unlimited period of time
No subscription, no hidden additional costs
Resetting to factory settings
- After activation, the Traffic Jam Assistant (STA) is available to you. If required, this can be activated or deactivated independently via the MMI. Within the system limits, you are thus driven autonomously by the vehicle when Traffic Jam Assist is active.
- After activation, the high beam assistant automatically turns the high beam on or off depending on the driving situation, making nighttime driving much easier.
- The system uses radar sensors and the front camera. It guides the car by making gentle steering movements within the system limits, taking its bearings from lane markings, edge structures and other vehicles on the road. When Traffic Jam Assist reaches its system limits - for example, when the traffic jam clears or there is a tight curve ahead - the driver must take over the driving task again himself. If he fails to do so, the system warns him in several stages. As a final measure, it automatically brings the car to a safe halt.
- Audi Q5 FY, Audi SQ5 FY
- Adaptive Cruise Controle (ACC) - Adapative Distance regulation is provided
- Lane Assist (Spurhalteassistent) is required (can be enabled via corresponding OBDAPP sequence if required)
- Transmission type: automatic
- all years of manufacture are supported
- SERVICE Electric Parking Brake for maintenance work open / close
- SERVICE Transport Mode adjust (disable / enable transport mode)
- SERVICE Haldex coupling open / close
- SERVICE Interval Manager (simple service reset for all supported VAG vehicle models)
- perform flexible oil service reset
- execute a reset of the scheduled inspection
- carry out a reset of the mileage-based inspection
- SERVICE Battery Manager
- set nominal battery capacity
- specify battery technology
- specify battery manufacture
- SERVICE Batterie data
- reads current voltage from 12V Batterie
- reads current state of charge from 12V Batterie
- reads current battery temperature from 12V Batterie
- SERVICE High-voltage Battery data
- reads current high-voltage battery voltage
- reads current high-voltage battery state of charge
- reads current high-voltage battery temperature
- OBDAPP Audi Q5 FY traffic jam assist (TJA) activation
- Technologie Made in Germany
- download free on Apple AppStore / Android PlayStore - OBDAPP Interface
- Hardware Made in EU
- 5 Jahre full manufacturer warranty - OBDAPP Interface storage case
- Made in Germany
- Hard shell case with digital print and custom-fit foam insert - OBDAPP quick start guide
- :
-
OBDAPP
only works with an
OBDAPP Interface!
OBDAPP Interface
The interface serves between the OBD system (on-board diagnostics) of the vehicle and our OBDAPP.
The connection between the smartphone / tablet and the OBDAPP interface is made via Bluetooth LE.
Any number of smart devices (smartphone or tablet) can be connected to one interface.
pimp your car in only 6 steps:
1. download OBDAPP from
Apple AppStore or Android Playstore
2. plug the OBDAPP Interface into
the OBD-Port of your car
3. activate ignition and
connect to the OBDAPP interface in OBDAPP
4. execute the full automated functions
or run dtc section and live data
5. check the function after activation
and enjoy your new features!
6. DONE!
You can unplug the OBDAPP interface from OBD-Port
(or let it plugged in)
