Audi A4 8W lane departure warning system camera-based activation
-33%
OBDAPP sequence
Audi A4 8W lane departure warning system camera-based activation
Your benefits
Additional plus for longer trips
Safety upgrade
Reduce risk of accidents
Upgrading of the vehicle
Unlimited, can be used for an unlimited period of time
Resetting to factory settings
- After successful activation, the Lane Assistant (lane keeping assistant) is displayed accordingly in the monochrome FIS / color FIS or Virtual Cockpit and you can use it within the system limits the automatic steering assistance fully as ordered from the factory.
- If you change the steering column lever, the Lane Assist can be activated or deactivated accordingly. If you do not change the steering column lever, Lane Assist can be set to permanently active and is thus automatically activated according to the specified speed thresholds (from 64 km/h Lane Assist is activated, if you drop below 60 km/h it is automatically deactivated).
- With the OBDAPP you are also able to switch the lane assist on or off while driving without steering column lever. In addition, in the MMI via driver assistance audi active lane assist can be configured / adjusted accordingly in the steering timing (normal or early) and the steering wheel vibration independently.
- Audi A4 8W B9, Audi S4 8W B9, Audi RS4 8W B9
- all years of manufacture
- Frontview camera (STGA5) provided
- SERVICE electric parking brake for maintenance work open / close
- SERVICE transport mode adjust (disable / enable transport mode)
- SERVICE haldex coupling open / close
- SERVICE interval manager (simple service reset for all supported VAG vehicle models)
- perform flexible oil service reset
- execute a reset of the scheduled inspection
- carry out a reset of the mileage-based inspection
- SERVICE battery manager
- set nominal battery capacity
- specify battery technology
- specify battery manufacture
- SERVICE battery data
- reads current voltage from 12V battery
- reads current state of charge from 12V battery
- reads current battery temperature from 12V battery
- SERVICE high-voltage battery data
- reads current high-voltage battery voltage
- reads current high-voltage battery state of charge
- reads current high-voltage battery temperature
- SERVICE ECU reset
- SERVICE STG 17 dashboard control unit reset
- SERVICE STG 5F infotainment control unit reset
- SERVICE STG 07 navigation control unit reset
- SERVICE STG 37 navigation control unit reset
- SERVICE STG 56 radio control unit reset
- OBDAPP Sequence Audi A4 8W lane departure warning system camera-based activation
- Technology made in Germany
- download free on Apple AppStore / Android PlayStore - OBDAPP Interface
- Hardware made in EU
- 5 years full manufacturer warranty - OBDAPP Interface storage case
- Made in Germany
- Hard shell case with digital print and custom-fit foam insert - OBDAPP quick start guide
-
Our OBDAPP
only works with an
OBDAPP Interface!
OBDAPP Interface
The interface serves between the OBD system (on-board diagnostics) of the vehicle and our OBDAPP.
The connection between the smartphone / tablet and the OBDAPP interface is made via Bluetooth LE.
Any number of smart devices (smartphone or tablet) can be connected to one interface.
pimp your car in only 6 steps:
1. download OBDAPP from
the Apple AppStore or Android Playstore
2. plug the OBDAPP Interface into
the OBD-Port of your car
3. activate ignition and
connect to the OBDAPP Interface
in OBDAPP
4. execute the full automated function
or run dtc section and live data
5. check the function after activation
and enjoy your new features!
6. DONE!
You can unplug the OBDAPP Interface from OBD-Port
(or let it plugged in if whised)
